Anmol Chemicals

Search for the supplies that you need here:

ISO-9001-14001-54001 JK Kosher Halal GMP GLP HACCP FSSAIAllergen freeStar Export India Gluten free Excipact
FSCC
FSCC 22000
Food Safety Systems Certification
cGMP, GLP - FDA Approved, ISO 9001, ISO 14001, ISO 17025, ISO 45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good Manufacturing Practice GMP and Good Laboratory Practice GLP
Excellence in Excipients and API Manufacturing .

DMF Support and Documentations Available

WHO GMP
WHO-GMP Certified

Good Manufacturing Practice Certified by World Health Organization
WC
WC, Written Confirmation

for Active Substance to be imported into European Union (EU).

Home ------ Contact

Hydroxypropyl Methylcellulose or Hydroxy Propyl Methyl Cellulose or HPMC or Hypromellose USP BP Ph Eur Grade Manufacturers

Anmol Chemicals is a manufacturer supplier exporter of Hydroxypropyl Methylcellulose or HPMC or Hypromellose and it offers materials as per IP BP EP Ph Eur USP NF JP FCC Food Grade as per the the latest monograph at best prices. Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty Chemicals, Pharmaceutical Excipients, Some API, Food Chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston, Chicago USA and Dubai, UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, EP, USP, NF, Ph. Eur., JP, FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grades and Pure Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the product in grams for your laboratory trial and in tons for your plant scale jobs.

We manufacture Bulk Drugs / API, Excipients, Pharmaceuticals (IP BP USP NF Ph Eur EP JP), Specialty Chemicals (Pure/Reagent), Mineral Fortifiers (FCC). Our manufacturing facility is FDA approved and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) is available. Solid materials can be customized for particle size, shape, and bulk density. We observe WHO Good Manufacturing Practices and Good Laboratory Practices. We are a government-recognized STAR Export House and "Authorised Economic Operator (AEO)" per Indian Customs.

All technical documents and DMF support available.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Hydroxypropyl Methylcellulose or HPMC or Hypromellose SDS of Manufacturers

Hydroxypropyl Methylcellulose, Hypromellose Manufacturers

Synonyms: Hydroxypropyl Methylcellulose or Hydroxypropyl Methyl Cellulose or Hydroxy Propyl Methyl Cellulose or HPMC or Hypromellose
CAS Number: 9004-65-3, EINECS EC Number: 618-389-6, FEMA: ----,

Specifications of Hypromellose USP Grade:
Cellulose, 2-hydroxypropyl methyl ether
Cellulose hydroxypropyl methyl ether --- CAS 9004-65-3

DEFINITION
Hypromellose is a methyl and hydroxypropyl mixed ether of cellulose. It contains, calculated on the dried basis, methoxy (– OCH3 : 31.03) and hydroxypropoxy (– OC3H6OH: 75.09) groups conforming to the limits for the types of Hypromellose (hydroxypropyl methylcellulose) set forth in the table below.
Substitution Type 1828; Methoxy% 16.5 to 20; Hydroxypropoxy% 23 to 32
Substitution Type 2208; Methoxy% 19.0 to 24; Hydroxypropoxy% 4 to 12
Substitution Type 2906; Methoxy% 27.0 to 30; Hydroxypropoxy% 4 to 7.5
Substitution Type 2910; Methoxy% 28.0 to 30; Hydroxypropoxy% 7 to 12

IDENTIFICATION
A.
Sample: 1 g
Analysis: Gently add the Sample to the top of 100 mL of water in a beaker, and allow to disperse over the surface, tapping the top of the container to ensure an even dispersion of the substance. Allow the beaker to stand for 1 - 2 min.
Acceptance criteria: The powdered material aggregates on the surface.
B.
Sample: 1 g
Analysis: Add the Sample to 100 mL of boiling water, and stir the mixture using a magnetic stirrer with a bar 25-mm long.
Acceptance criteria: A slurry is formed, but the powdered material does not dissolve. Cool the slurry to 10C and stir using a magnetic stirrer: the resulting liquid is a clear or slightly turbid solution with thickness dependent on the viscosity grade.
C.
Solution A: Sulfuric acid and water (9 in 10). [Note— Carefully add sulfuric acid to water. ]
Sample solution: 0.1 mL of the solution prepared for Identification test B
Analysis: To the Sample solution add 9 mL of Solution A, and shake. Heat in a water bath for exactly 3 min, immediately cool in an ice bath, and add carefully 0.6 mL of ninhydrin. Shake and allow to stand at 25C.
Acceptance criteria: A red color develops at first that changes to purple within 100 min.
D.
Sample solution: 2–3 mL of the solution prepared for Identification test B
Analysis: Pour the Sample solution onto a glass slide as a thin film, and allow the water to evaporate.
Acceptance criteria: A coherent, clear film forms on the glass slide.
E.
Sample solution: 50 mL of the solution prepared in Identification test B
Analysis: Add the Sample solution to exactly 50 mL of water in a beaker. Insert a thermometer into the solution. Stir the solution on a magnetic stirrer/hot plate and begin heating at a rate of 2C - 5C/min. Determine the temperature at which a turbidity increase begins to occur, and designate this temperature as the flocculation temperature.
Acceptance criteria: The flocculation temperature is higher than 50C.

Residue on Ignition:
Sample: 1.0 g
Acceptance criteria: NMT 1.5%
pH:
Sample: Use the solution prepared in the tests for Viscosity.
Analysis: Read the indicated pH value after the probe has been immersed for 5 ± 0.5 min.
Acceptance criteria: 5.0 - 8.0
Loss on Drying:
Sample: 1.0 g
Analysis: Dry the Sample at 105C for 1 h.
Acceptance criteria: NMT 5.0%
Viscosity: To pass the test.
Acceptance criteria: 75% 140% of the viscosity stated on the label
Packaging and Storage: Preserve in well-closed containers. No storage requirements are specified.
Labeling: Label it to indicate its substitution type and its nominal viscosity value in millipascals per second (mPas).


Specifications of Hypromellose BP Ph Eur Grade:
CAS 9004-65-3

DEFINITION
Hydroxypropylmethylcellulose. Cellulose, 2-hydroxypropylmethyl ether. Partly O-methylated and O-(2-hydroxypropylated) cellulose.
Content: Methoxy (-OCH3; Mr 31.03) and hydroxypropoxy (-OC3H6OH; Mr 75.09) groups (dried substance) conforming to the types of hypromellose set forth in the accompanying table.

CHARACTERS
Appearance: White, yellowish-white or greyish-white powder or granules, hygroscopic after drying.
Solubility: Practically insoluble in hot water, in acetone, in anhydrous ethanol and in toluene. It dissolves in cold water giving a colloidal solution.

IDENTIFICATION
A. Evenly distribute 1.0 g onto the surface of 100 mL of water in a beaker, tapping the top of the beaker gently, if necessary, to ensure a uniform layer on the surface. Allow to stand for 1-2 min: the powdered material aggregates on the surface.
B. Evenly distribute 1.0 g into 100 mL of boiling water, and stir the mixture using a magnetic stirrer with a bar 25 mm long: a slurry is formed and the particles do not dissolve. Allow the slurry to cool to 10C and stir using a magnetic stirrer: a clear or slightly turbid solution occurs with its thickness dependent on the viscosity grade.
C. To 0.1 mL of the solution obtained in identification test B add 9 mL of a 90 per cent V/V solution of sulfuric acid, shake, heat on a water-bath for exactly 3 min, immediately cool in an ice-bath, carefully add 0.6 mL of a 20 g/L solution of ninhydrin, shake and allow to stand at 25C: a red colour develops at first and changes to purple within 100 min.
D. Place 2-3 mL of the solution obtained in identification test B onto a glass slide as a thin film and allow the water to evaporate: a coherent, clear film forms on the glass slide.
E. Add 50.0 mL of the solution obtained in identification test B to 50.0 mL of water in a beaker. Insert a thermometer into the solution. Stir the solution on a magnetic stirrer/hot plate and begin heating, increasing the temperature at a rate of 2-5C per minute. Determine the temperature at which a turbidity increase begins to occur and designate the temperature as the flocculation temperature: the flocculation temperature is higher than 50C.

TESTS
Appearance of solution: The solution is not more opalescent than reference suspension III and not more intensely coloured than reference solution.
While stirring, introduce a quantity of the substance to be examined equivalent to 1.0 g of the dried substance into 50 g of carbon dioxide-free water heated to 90C. Allow to cool, adjust the mass of the solution to 100 g with carbon dioxide-free water and stir until dissolution is complete.
pH: 5.0 to 8.0 for the solution prepared as described under Viscosity. Read the indicated pH value after the probe has been immersed for 5 ± 0.5 min.
Viscosity: 80 per cent to 120 per cent of the nominal value for samples with a viscosity less than 600 mPas; 75 per cent to 140 per cent of the nominal value for samples with a viscosity of 600 mPas or higher.
Loss on drying: Maximum 5.0 per cent, determined on 1.000 g by drying in an oven at 105C for 1 h.
Sulfated ash: Maximum 1.5 per cent, determined on 1.0 g.

LABELLING
The label states:
— the nominal viscosity in millipascal seconds (mPas);
— the substitution type.


Specifications of Hydroxypropyl Methylcellulose FCC Food Grade:
Propylene Glycol Ether of Methylcellulose; Modified Cellulose, HPMC
INS: 464 CAS 9004-65-3

DESCRIPTION
Hydroxypropyl Methylcellulose occurs as a white to off-white, fibrous powder or as granules. It is the propylene glycol ether of methylcellulose in which both the hydroxypropyl and the methyl groups are attached to the anhydroglucose rings of cellulose by ether linkages. Several product types are available that are defined by varying combinations of methoxyl and hydroxypropoxyl content. It is soluble in water and in certain organic solvent systems. Aqueous solutions are surface active, form films upon drying, and undergo a reversible transformation from sol to gel upon heating and cooling, respectively.
Function: Thickening agent; stabilizer; emulsifier.

REQUIREMENTS
Identification:
A. Add 1 g of sample to 100 mL of water. It swells and disperses to form a clear to opalescent, mucilaginous solution, depending on the intrinsic viscosity, which is stable in the presence of most electrolytes.
B. Add 1 g of sample to 100 mL of boiling water, and stir the mixture. A slurry forms that when cooled to 20C, dissolves to form a clear or opalescent, mucilaginous solution.
C. Pour a few milliliters of the solution prepared for Identification Test B onto a glass plate and allow the water to evaporate. A thin, self-sustaining film forms.
Assay for Hydroxypropoxyl Groups: Between a minimum of 3.0% and a maximum of 12.0% of hydroxypropoxyl groups (-OCH2CHOHCH3), within the range claimed by the vendor for any product type.
Assay for Methoxyl Groups: Between a minimum of 19.0% and a maximum of 30.0% of methoxyl groups (-OCH3), within the range claimed by the vendor for any product type.
Lead: Not more than 3 mg/kg.
Loss on Drying: Not more than 5.0%.
Residue on Ignition: Not more than 1.5% for products with viscosities of 50 centipoises or above; not more than 3.0% for products with viscosities below 50 centipoises.
Viscosity: The viscosity of an aqueous solution containing 2 g of sample per 100 g of solution is not less than 80.0% and not more than 120.0% of that stated on the label for viscosity types of 100 centipoises or less, and not less than 75.0% and not more than 140.0% of that stated on the label for viscosity types higher than 100 centipoises.

Keywords: Hydroxypropyl Methylcellulose or Hydroxypropyl Methyl Cellulose or HPMC or Hydroxy Propyl Methyl Cellulose or Hypromellose IP BP Ph Eur EP USP Analytical Reagent FCC Food Grade CAS Number 9004-65-3 Manufacturer Supplier Exporter Monograph Uses Chemical Molecular Formula Weight.

Logo Star Export India AEO India

Manufacturers

ANMOL CHEMICALS
Now maturing as Anmol Chemicals Private Limited
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91 22 23726950, +91 22 23774610, +91 22 23723564
Taloja Navi Mumbai, INDIA

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 27-feb-24

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Kuwait, Qatar, Gautemala, Tunisia, Europe, South Africa, Bangladesh, Sri Lanka, Tanzania, Kenya, Egypt, Iraq, Turkey, Israel, Vietnam, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, UAE, Saudi Arabia, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Jakarta, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

All products are Sold for Industrial Use only. No other use is permitted. Specifications provided are for reference. Grade approvals pending.

Fast Selling IP BP Ph Eur EP USP NF JP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Ammonium Persulfate --- Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Benzyl Alcohol --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Boric Acid --- Calcium Butyrate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Lactobionate --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Bromate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---

Hypromellose
Hydroxypropyl Methylcellulose or Hydroxypropyl Methyl Cellulose or HPMC BP Ph Eur Grades Manufacturers
Hypromellose