(FDA) GMP Approved, ISO-9001:2008, ISO-14001, ISO OHSAS-18001, HACCP, FSSC 220000, FSSAI, "REACH" Pre-registered Kosher & Halal Certified
Potassium Bicarbonate USP BP IP ACS Analytical Reagent FCC Food Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA and toll manufacturers in China. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards.
Our manufacturing facility is FDA approved and GMP, ISO-9001-2008, ISO-14001, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape.
Potassium Bicarbonate SDS of Manufacturers
Synonyms: Potassium hydrogen carbonate, Potassium acid carbonate
CAS Number: 298-14-6, Molecular Weight: 100.1, Chemical Formula: KHCO3, EINECS EC Number: 206-059-0, FEMA: ----,
Potassium Bicarbonate BP
Potassium, Hydrogen Carbonate, Ph Eur
KHCO3 100.1 298-14-6
Content: 99.0 per cent to 101.0 per cent.
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
When heated in the dry state or in solution, it is gradually converted to potassium carbonate.
A. To 5 mL of solution S (see Tests) add 0.1 mL of phenolphthalein solution. A pale pink
colour is produced. Heat; gas is evolved and the colour becomes red.
B. It gives the reaction of carbonates and bicarbonates.
C. 1 mL of solution S gives reaction (b) of potassium.
Solution S: Dissolve 5.0 g in 90 mL of carbon dioxide-free water prepared from distilled water and dilute to 100 mL with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Carbonates: The pH of freshly prepared solution S is not greater than 8.6.
Chlorides: Maximum 150 ppm.
Sulfates: Maximum 150 ppm.
Ammonium: Maximum 20 ppm.
Calcium: Maximum 100 ppm.
Iron: Maximum 20 ppm, determined on solution S.
Sodium: Maximum 0.5 per cent.
Atomic emission spectrometry: To pass the test.
Heavy metals: Maximum 10 ppm.
Dissolve 0.800 g in 50 mL of carbon dioxide-free water. Add 0.1 mL of methyl orange solution. Titrate with 1 M hydrochloric acid until the yellow colour begins to change to yellowish-pink. Heat cautiously and boil for at least 2 min. The solution becomes yellow. Cool and titrate until a yellowish-red colour is obtained.
1 mL of 1 M hydrochloric acid is equivalent to 0.1001 g of KHCO3.
Potassium Bicarbonate USP
Carbonic acid, monopotassium salt.
Monopotassium carbonate [298-14-6].
Potassium Bicarbonate contains not less than 99.5 percent and not more than 101.5 percent of KHCO3, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Potassium and for Bicarbonate .
Loss on drying: Dry it over silica gel for 4 hours: it loses not more than 0.3% of its weight.
Normal carbonate: Grind 3.0 g of Potassium Bicarbonate with 25 mL of alcohol and 5 mL of water in a porcelain mortar. Add 3 drops of phenolphthalein TS, and titrate slowly with barium chloride solution, prepared by dissolving 12.216 g of barium chloride in 300 mL of water and diluting with alcohol to obtain 1000 mL of solution, until the suspension becomes colorless. Continue the grinding for 2 minutes, and if the color turns pink, continue the titration with the barium chloride solution to a colorless end-point. Repeat the grinding for 2 minutes and the addition of the barium chloride solution, if necessary, until the suspension is colorless after 2 minutes of grinding. Each mL of the barium chloride solution is equivalent to 6.911 mg of K2CO3: not more than 2.5% is found.
Heavy metals: To 2 g add 5 mL of water and 8 mL of 3 N hydrochloric acid, heat to boiling, and maintain that temperature for 1 minute. Add 1 drop of phenolphthalein and sufficient 6 N ammonium hydroxide, drop wise, to give the solution a faint pink color. Cool, add 2 mL of 1 N acetic acid, and then dilute with water to 25 mL: the limit is 0.001%.
Assay: Dissolve about 4 g of Potassium Bicarbonate, accurately weighed, in 100 mL of water, add methyl red TS, and titrate with 1 N hydrochloric acid VS. Add the acid slowly, with constant stirring, until the solution becomes faintly pink. Heat the solution to boiling, cool, and continue the titration until the pink color no longer fades after boiling. Each mL of 1 N hydrochloric acid is equivalent to 100.1 mg of KHCO3.
Potassium Bicarbonate FCC Food Grade
KHCO3 Formula wt 100.12
INS: 501(ii) CAS: [298-14-6]
Potassium Bicarbonate occurs as colorless, transparent, monoclinic prisms or as a white, granular powder. It is stable in air. Its solutions are neutral or alkaline to phenolphthalein. One gram dissolves in 2.8 mL of water. It is almost insoluble in alcohol.
Function: pH control; leavening agent.
Identification A 1:10 aqueous solution gives positive tests for Potassium and for Bicarbonate.
Assay: Not less than 99.0% and not more than 101.5% of KHCO3, calculated on the dried basis.
Carbonate: Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.25%.
Potassium Bicarbonate ACS AR Analytical Reagent Grade
Potassium Hydrogen Carbonate
Formula Wt: 100.12
CAS Number: 298-14-6
Assay (dried basis): 99.7-100.5% KHCO3
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfur compounds (as SO4): 0.003%
Ammonium (NH4): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Sodium (Na): 0.03%
Taloja Mumbai and Ankleshwar Gujarat, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) 91-22-23726950, 23774610, 23723564
Copyright and Usual Disclaimer is Applicable
Last updated 7-aug-17
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP USP ACS FCC Food Grades of Chemicals by Anmol Chemicals
Aluminum Chloride --- Ammonium Chloride --- Ammonium Molybdate --- Benzyl Alcohol --- Bismuth Citrate --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Carmellose Calcium --- Carmellose Sodium --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid ---Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Magnesium Oxide --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Propylene Carbonate --- Potassium Bromide --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Sodium Acetate --- Sodium Butyrate --- Sodium Molybdate --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Ceric Ammonium Nitrate --- Encapsulated Fumaric Acid --- Picric Acid --- Sodium Diacetate
IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grades